{"title":"Black Friday 2025 - 15%","description":"","products":[{"product_id":"string-theory-adjustable-rear-toe-link-arms-cup-car-style-996-997-986-987","title":"STG Adjustable Rear Toe Link Arms - Cup Car Style 996 997 986 987","description":"\u003ch2\u003eSTG Adjustable Rear Toe Link Arms — Cup Car Style | Porsche 996, 997, 986, 987\u003c\/h2\u003e\n\n\u003cp\u003eRear toe geometry is one of the most overlooked settings on Porsche 911 and Boxster\/Cayman platforms — and one of the most consequential. The OEM toe link arms are fixed, which means that once ride height changes (whether through coilovers, springs or even just wear), toe geometry moves with it and never returns to optimal without correction.\u003c\/p\u003e\n\n\u003cp\u003eThese STG adjustable rear toe link arms replace the standard fixed units with fully adjustable cup-car-style components, giving you independent control of rear toe at each corner. The result is precise, repeatable alignment adjustment — essential for anyone running lowered ride height, corner weights or a specific alignment setup for road or track.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull toe adjustment at each rear corner — independent left and right control\u003c\/li\u003e\n  \u003cli\u003eCup car-style design: rod-end bearing construction for zero compliance and maximum precision\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high-strength aluminium with anodised finish\u003c\/li\u003e\n  \u003cli\u003eDirect replacement for OEM toe link — no modifications required\u003c\/li\u003e\n  \u003cli\u003eWorks with standard or aftermarket suspension and ride heights\u003c\/li\u003e\n  \u003cli\u003eRecommended for use with any coilover or lowered spring kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Porsche 911 (996, 997) and Boxster\/Cayman (986, 987). See our separate 981\/718 listing for the next-generation platforms.\u003c\/p\u003e\n\n\u003ch3\u003eWhy do I need adjustable toe arms?\u003c\/h3\u003e\n\u003cp\u003eWhen you lower a 996, 997, 986 or 987, the rear toe geometry changes — often significantly. Fixed OEM arms cannot compensate for this. Running incorrect rear toe affects tyre wear, straight-line stability and corner exit behaviour. Adjustable arms allow your alignment specialist (or us, if you book a setup at our premises) to set the toe precisely to your target — and hold it there.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn stock. SKU: STG-POR-ADJTOE-1 | £405\u003c\/strong\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":44401396056341,"sku":"STG-POR-ADJTOE-1","price":405.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_1332eef5715842969b43c59b3b31ff37_mv2.jpg?v=1706520192"},{"product_id":"string-theory-titanium-exhaust-manifold-stud-kit-911-996-turbo-gt3-gt2","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 (996) Turbo, GT3, GT2","description":"\u003ch2\u003eSTG Titanium Exhaust Manifold Stud Kit — Porsche 911 (996) Turbo, GT3 \u0026amp; GT2\u003c\/h2\u003e\n\n\u003cp\u003eIf you're working on the exhaust of a Porsche 996, you've almost certainly already encountered seized manifold bolts — or you will. It's one of the most common and frustrating maintenance headaches on the platform. The OEM steel studs corrode into the aluminium head over time, and removing them becomes a job that can spiral from a simple gasket change into a cylinder head-off rebuild.\u003c\/p\u003e\n\n\u003cp\u003eThis titanium stud kit is the permanent fix. Titanium doesn't corrode against aluminium in the way steel does, which means these studs come out cleanly if you ever need to remove them again — next year or a decade from now.\u003c\/p\u003e\n\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull set of titanium exhaust manifold studs for Porsche 996 (Turbo, GT3, GT2)\u003c\/li\u003e\n  \u003cli\u003eMatching titanium nuts\u003c\/li\u003e\n  \u003cli\u003eCopper washers\u003c\/li\u003e\n  \u003cli\u003eAnti-seize compound\u003c\/li\u003e\n  \u003cli\u003eFull fitting instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eTechnical details\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eMaterial: Grade 5 titanium (Ti-6Al-4V) — lighter than steel, stronger than necessary, and crucially non-reactive with aluminium\u003c\/li\u003e\n  \u003cli\u003eWeight saving vs OEM steel studs: approximately 60%\u003c\/li\u003e\n  \u003cli\u003eTemperature rating: suitable for sustained high-temperature exhaust use\u003c\/li\u003e\n  \u003cli\u003eThread: OEM-spec — direct replacement, no modifications required\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Porsche 911 (996), years 1999–2005. Variants: Turbo, Turbo S, GT3, GT3 RS, GT2.\u003c\/p\u003e\n\u003cp\u003eAlso available for Porsche 997 and 991 GT3 — see our other listings.\u003c\/p\u003e\n\n\u003ch3\u003eWhen should I fit these?\u003c\/h3\u003e\n\u003cp\u003eIdeally when the exhaust is already off — during a header swap, turbo rebuild, or manifold gasket replacement. Fitting these while you have access costs nothing extra and eliminates the risk of seized studs for the lifetime of the car. We fit them as standard whenever a 996 exhaust comes off at our premises.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIn stock and available for immediate dispatch. SKU: STGTEMSK996\u003c\/strong\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":44401396089109,"sku":"STGTEMSK996","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_a6278ca1c14f4cb9a4dab34e482f7030_mv2.jpg?v=1677853542"},{"product_id":"string-theorytitanium-exhaust-manifold-stud-kit-911-997-turbo-gt3-gt2gen-1","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 (997) Turbo GT3 GT2","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 997, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e18x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e18x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e18x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 997 Turbo\u003c\/b\u003e (Gen 1 \u0026amp; Gen 2)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,1,0\"\u003e\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003ePorsche 997 GT3 \/ GT3 RS\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,2,0\"\u003e\u003cb data-path-to-node=\"14,2,0\" data-index-in-node=\"0\"\u003ePorsche 997 GT2\u003c\/b\u003e (Gen 1)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eCustom Applications:\u003c\/b\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003cb data-path-to-node=\"15\" data-index-in-node=\"140\"\u003econtact us\u003c\/b\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":44401396187413,"sku":"STGTEMSK997","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_a6278ca1c14f4cb9a4dab34e482f7030_mv2_8c05ecd7-dea3-4e8e-8bfc-5c0d4b5bd3f9.jpg?v=1677853649"},{"product_id":"string-theory-titanium-exhaust-manifold-stud-kit-911-991-gt3","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 (991) GT3","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 991, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e18x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e18x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e18x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 991 GT3\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eCustom Applications:\u003c\/b\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003cb data-path-to-node=\"15\" data-index-in-node=\"140\"\u003econtact us\u003c\/b\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":44401396252949,"sku":"STGTEMSK991","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_a6278ca1c14f4cb9a4dab34e482f7030_mv2_e9a2c242-a48a-475e-a27e-a33123d05183.jpg?v=1677853654"},{"product_id":"string-theory-adjustable-rear-toe-link-arms-cup-car-style-981-718","title":"STG Adjustable Rear Toe Link Arms - Cup Car Style 981 718","description":"\u003ch2\u003eSTG Adjustable Rear Toe Link Arms — Cup Car Style | Porsche 981 \u0026amp; 718\u003c\/h2\u003e\n\n\u003cp\u003eThe same precision toe adjustment that's essential on the older 996\/997\/986\/987 platforms is equally important on the 981 and 718 — particularly once the ride height is changed. These STG cup car-style adjustable rear toe link arms replace the fixed OEM units and give you independent, repeatable control of rear toe at each corner.\u003c\/p\u003e\n\n\u003cp\u003eRod-end bearing construction eliminates all rubber bush compliance, so the geometry you set stays exactly where you put it — under lateral load, under braking, and across an entire track day. Essential for any 981 or 718 running coilovers or lowered springs.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eFull independent toe adjustment at each rear corner\u003c\/li\u003e\n  \u003cli\u003eCup car-style rod-end bearing construction — zero compliance, maximum precision\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high-strength aluminium with anodised finish\u003c\/li\u003e\n  \u003cli\u003eDirect OEM replacement — no car modifications required\u003c\/li\u003e\n  \u003cli\u003eSuitable for road and track use\u003c\/li\u003e\n  \u003cli\u003eRecommended alongside any coilover or spring kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Porsche 981 Cayman\/Boxster (all variants, 2012–2016) and Porsche 718 Cayman\/Boxster (982, all variants, 2016–present).\u003c\/p\u003e\n\u003cp\u003eFor the older 986\/987\/996\/997 platforms, see our dedicated listing.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSKU: STG-TOE-981718 | £405. Available for immediate dispatch.\u003c\/strong\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":44401396384021,"sku":"STG-TOE-981718","price":405.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_a9a444ce7698478986236166dbc2baf8_mv2_fca9f67e-034e-4ae5-b450-dbbebb37ad41.jpg?v=1677853549"},{"product_id":"stg-yaris-gr-21-5mm-bolt-on-spacers","title":"STG GR Yaris 21.5mm Bolt-on Spacers (Set of 4)","description":"\u003ch2\u003eSTG GR Yaris 21.5mm Bolt-On Wheel Spacers — Set of 4\u003c\/h2\u003e\n\n\u003cp\u003eThe most popular upgrade among GR Yaris owners — and for good reason. Our 21.5mm bolt-on aluminium wheel spacers are engineered specifically for the Toyota GR Yaris, filling the arches cleanly, widening the track for improved stability, and giving the stance that the factory setup never quite delivered.\u003c\/p\u003e\n\n\u003cp\u003eUnlike slip-on spacers, our bolt-on design uses extended wheel bolts that thread directly into the hub — making them the only type approved for road and track use. These are the spacers fitted to our own demo car, tested at events and on the road before ever going on sale.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003e21.5mm thickness — the ideal fitment for GR Yaris Gen 1 \u0026amp; Gen 2 with standard arches\u003c\/li\u003e\n  \u003cli\u003eBolt-on design with 60mm extended wheel bolts included — no separate bolts required\u003c\/li\u003e\n  \u003cli\u003eCNC-machined from high-grade 6061-T6 aluminium billet\u003c\/li\u003e\n  \u003cli\u003eHub-centric fit: 54.1mm centre bore, precision-machined to match GR Yaris hub exactly\u003c\/li\u003e\n  \u003cli\u003ePCD: 5×114.3 — compatible with all GR Yaris wheel specifications\u003c\/li\u003e\n  \u003cli\u003eAnodised finish for corrosion resistance\u003c\/li\u003e\n  \u003cli\u003eSet of 4 spacers — one per corner\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with:\u003c\/strong\u003e Toyota GR Yaris Gen 1 (2020–2024) and GR Yaris Gen 2 (2024–present). Suitable for use with OEM wheels and most aftermarket 18\" fitments. If running larger-than-standard tyres or aftermarket arches, contact us before ordering.\u003c\/p\u003e\n\n\u003ch3\u003eWhy 21.5mm?\u003c\/h3\u003e\n\u003cp\u003eWe arrived at 21.5mm after extensive testing across different wheel and tyre combinations on our own GR Yaris fleet. It's the sweet spot: enough to transform the stance and widen the track by 43mm total (front and rear), without rubbing on standard arches under full lock or compression.\u003c\/p\u003e\n\n\u003cp\u003eWith over 290 sets sold, these are by far the most popular single upgrade we offer — and the most common first modification GR Yaris owners make.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eSupplied as a complete set of 4 with all fixing hardware. Available for immediate dispatch.\u003c\/strong\u003e If you have a fitment question, get in touch — we know this car inside out.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":44401404084501,"sku":"STG-21.5MM","price":289.95,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Spacers1_8a70907d-34ce-40a0-973c-7f148faf7746.jpg?v=1732188309"},{"product_id":"lower-control-arm-shim","title":"String Theory Garage Porsche Lower Control Arm Camber Shim 718 | 981 | 996 | 997 | 991 | 992","description":"\u003ch2 data-path-to-node=\"3\"\u003eString Theory Garage Porsche Lower Control Arm Camber Shims\u003c\/h2\u003e\n\u003ch3 data-path-to-node=\"4\"\u003ePrecision Camber Adjustment for the Ultimate Track Setup\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eAchieving the perfect alignment is critical for Porsche GT and Spyder models, especially when transitioning from road to track. \u003cb data-path-to-node=\"5\" data-index-in-node=\"128\"\u003eString Theory Garage Camber Shims\u003c\/b\u003e are engineered to provide precise adjustment for your lower control arms, allowing you to dial in the exact negative camber and track width required for maximum cornering grip.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eWhether you are running factory Porsche \"split\" control arms or high-performance aftermarket units, our shims offer a simple, robust, and repeatable way to optimize your tyre contact patch and sharpen front-end turn-in.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Choose String Theory Garage Shims?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eOptimized Handling:\u003c\/b\u003e Increasing negative camber reduces outer tyre shoulder wear and improves lateral grip during high-speed cornering.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eTrack Width Gains:\u003c\/b\u003e Adding shims effectively extends the lower control arm, slightly increasing the car's track width for improved stability.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003ePrecision Increments:\u003c\/b\u003e Available in \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"35\"\u003e2mm and 5mm\u003c\/b\u003e thicknesses, allowing for granular adjustments to meet your specific geometry targets.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,3,0\"\u003e\u003cb data-path-to-node=\"8,3,0\" data-index-in-node=\"0\"\u003ePremium Construction:\u003c\/b\u003e CNC-cut to exacting tolerances to ensure a perfect, flush fit within the control arm slot, preventing any movement or \"slippage\" under heavy load.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eVehicle Compatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eOur shims are designed for a wide range of Porsche models utilizing the \"split\" lower control arm design:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003ePorsche 911 GT3 \/ GT3 RS:\u003c\/b\u003e Front Control Arms (996, 997, 991, and 992 generations).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003ePorsche 718 \u0026amp; 981 GT4 \/ GT4 RS:\u003c\/b\u003e Front and Rear Control Arms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003ePorsche 718 Spyder \/ Spyder RS:\u003c\/b\u003e Front and Rear Control Arms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-path-to-node=\"11,3,0\" data-index-in-node=\"0\"\u003eAftermarket Arms:\u003c\/b\u003e Compatible with most Motorsport-style split lower control arms.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"12\"\u003e\n\u003ch3 data-path-to-node=\"13\"\u003eSpecialist Alignment Services at String Theory Garage\u003c\/h3\u003e\n\u003cp data-path-to-node=\"14\"\u003eShims are only as good as the setup they are part of. At our \u003cb data-path-to-node=\"14\" data-index-in-node=\"61\"\u003eStratford-upon-Avon workshop\u003c\/b\u003e, we specialize in bespoke Porsche alignments. We don't just \"fit parts\"—we use our in-house expertise to help you find the perfect balance for your driving style.\u003c\/p\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003ePlanning a setup?\u003c\/b\u003e Select \u003cb data-path-to-node=\"15\" data-index-in-node=\"25\"\u003e\"Collection from String Theory\"\u003c\/b\u003e at checkout, and we can incorporate these shims into a full chassis setup and string alignment booking for your car.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"2mm","offer_id":44401430200597,"sku":"","price":14.0,"currency_code":"GBP","in_stock":true},{"title":"5mm","offer_id":44401430233365,"sku":"","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/IMG_1243_1.jpg?v=1730985811"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-718-spyder","title":"STG Titanium OPF to Backbox Stud Kit - 718 Cayman | Spyder | Boxster","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped OPF\/Backbox Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 718, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur\u003cspan\u003e \u003c\/span\u003e\u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003ecompletely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eUnlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eAerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eWe’ve paired these studs with\u003cspan\u003e \u003c\/span\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e18x Grade 5 Titanium Studs\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e(M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e18x Brass Washers\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e(To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e18x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e(Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 718 Cayman Inc GT4 \u0026amp; GT4 RS | Spyder \u0026amp; RS | Boxster\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThese studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please\u003cspan\u003e \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\"\u003econtact us\u003c\/b\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":45451016831253,"sku":"STGTEMSK718","price":95.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/WhatsAppImage2023-07-24at10.57.14.jpg?v=1690193546"},{"product_id":"porsche-billet-aluminium-magnetic-pdk-shifter-paddles","title":"STG Tactile RS Style Billet Aluminium Magnetic PDK Shifter Paddles | Porsche 718 \u0026 911 (991)","description":"\u003cp\u003e\u003cspan\u003eThe magnetic haptic elements derived from the 911 992 GT3RS setup give these an even crisper and positive shift engagement feel with a very audible \u003cstrong\u003e”CLICK”\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThey allow a higher operating force and provide precise acoustic feedback for the switching point. \u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eSimple Installation (Plug and Play)\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eBillet 6061 CNC Aluminium\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eHaptic Magnetic Elements\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAcoustic Feedback\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eErgonomic Design\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003ePositive and Precise Shift Feel\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eWill fit the following Porsche Models:\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003e718 GT4 | GT4RS\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e718 Cayman | S | GTS | GTS 4.0 | Boxster | S | GTS | GTS 4.0\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e718 Spyder | Spyder RS\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e911 991.1 GT3RS \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e911 991.2 GT3 | GT3RS | GT2RS \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cspan\u003e911 991.2 Carrera | S | Turbo | GTS\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e958.2 Cayenne | S | GTS | Turbo | Turbo S\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003e958.1 Macan | S | GTS | Turbo\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOption to include fitting, or ship direct to you.  \u003c\/p\u003e\n\u003cp\u003ePlease select \"Fitted by String Theory Garage\" from the drop down and select collect from String Theory as your delivery option if you would like them fitted and we will contact you to arrange booking in. \u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Yellow \/ Supply Only","offer_id":54850567831936,"sku":"","price":295.0,"currency_code":"GBP","in_stock":true},{"title":"Yellow \/ Fitted by String Theory Garage","offer_id":54850567864704,"sku":"","price":355.0,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Supply Only","offer_id":54850559476096,"sku":"","price":295.0,"currency_code":"GBP","in_stock":true},{"title":"Red \/ Fitted by String Theory Garage","offer_id":54850559508864,"sku":"","price":355.0,"currency_code":"GBP","in_stock":true},{"title":"White \/ Supply Only","offer_id":54851693019520,"sku":"","price":295.0,"currency_code":"GBP","in_stock":false},{"title":"White \/ Fitted by String Theory Garage","offer_id":54851693052288,"sku":"","price":355.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/IMG_1481_14d60ec9-392e-4bf6-a736-f3a92c5c9026.jpg?v=1732810974"},{"product_id":"toyota-gr-yaris-front-brake-cooling-ducts-pair","title":"Toyota GR Yaris Front Brake Cooling Ducts - Pair","description":"\u003ch2 data-path-to-node=\"3\"\u003eToyota GR Yaris Front Brake Cooling Ducts | Track-Ready Performance\u003c\/h2\u003e\n\u003ch3 data-path-to-node=\"4\"\u003eEliminate Brake Fade and Push Your Limits\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eThe Toyota GR Yaris is a track-day weapon, but intense driving sessions can quickly lead to high brake temperatures and \"spongey\" pedal feel. Our \u003cb data-index-in-node=\"146\" data-path-to-node=\"5\"\u003eGR Yaris Front Brake Cooling Ducts\u003c\/b\u003e are specifically engineered to solve this, channelling high-velocity air from the front bumper directly to the braking assembly.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eBy lowering the operating temperature of your pads and discs, these ducts significantly reduce the risk of brake fade, ensuring consistent stopping power during spirited road driving or prolonged track sessions.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003ePrecision Engineering \u0026amp; \"No-Cut\" Fitment\u003c\/h3\u003e\n\u003cp data-path-to-node=\"8\"\u003eWe believe performance upgrades shouldn't mean compromising your car’s integrity. These ducts have been meticulously designed to offer a \u003cb data-index-in-node=\"137\" data-path-to-node=\"8\"\u003ehassle-free installation\u003c\/b\u003e with \u003cb data-index-in-node=\"167\" data-path-to-node=\"8\"\u003ezero alterations\u003c\/b\u003e required to your car’s bodywork.\u003c\/p\u003e\n\u003cul data-path-to-node=\"9\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,0,0\"\u003e3D Printed Durability:\u003c\/b\u003e Manufactured using high-quality materials to withstand the heat and debris of a track environment.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,1,0\"\u003eMaximum Clearance:\u003c\/b\u003e Profiled to ensure full wheel clearance even under heavy suspension compression and full steering lock.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"9,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"9,2,0\"\u003eOEM Integration:\u003c\/b\u003e Designed to fit UK Circuit Pack cars using OEM wheels, utilizing the existing air feeds for a clean, professional finish.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"10\"\u003eKey Features at a Glance\u003c\/h3\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,0,0\"\u003eDirect Air Supply:\u003c\/b\u003e Optimized flow path from the front bumper to the inner brake face.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,1,0\"\u003eTrack-Tested Design:\u003c\/b\u003e Specifically engineered for the GR Yaris chassis.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,2,0\"\u003eEffortless Installation:\u003c\/b\u003e Bolt-on fitment with all necessary hardware included.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,3,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,3,0\"\u003eStealth Aesthetics:\u003c\/b\u003e Finished in Black as standard for an OEM+ look.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,4,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,4,0\"\u003eCustom Options:\u003c\/b\u003e Available in various colours on a made-to-order basis—\u003cb data-index-in-node=\"69\" data-path-to-node=\"11,4,0\"\u003eContact us\u003c\/b\u003e to discuss your custom build.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr data-path-to-node=\"12\"\u003e\n\u003ch3 data-path-to-node=\"13\"\u003eFitment Notes\u003c\/h3\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,0,0\"\u003eCircuit Pack Cars:\u003c\/b\u003e Direct fit for UK Circuit Pack models on OEM wheels.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,1,0\"\u003eNon-Circuit Pack Cars:\u003c\/b\u003e Will require the installation of the \"bumper-to-inner-arch\" feed (available separately from Toyota).\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,2,0\"\u003eAftermarket Wheels:\u003c\/b\u003e If you are running aggressive offsets or wider wheels, please contact us to verify clearance.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"15\"\u003eProfessional Installation in Stratford-upon-Avon\u003c\/h3\u003e\n\u003cp data-path-to-node=\"16\"\u003eWant the peace of mind of a professional fitment? We can install these for you at our \u003cb data-index-in-node=\"86\" data-path-to-node=\"16\"\u003eString Theory Garage\u003c\/b\u003e workshop.\u003c\/p\u003e\n\u003cp data-path-to-node=\"17\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"17\"\u003eHow to book:\u003c\/b\u003e Select \u003cb data-index-in-node=\"20\" data-path-to-node=\"17\"\u003e\"Collection from String Theory\"\u003c\/b\u003e as your delivery option during checkout, and our team will be in touch to schedule your appointment.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":54868430881152,"sku":"STG-GR-BRAKEDUCTS","price":200.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/String_Theory_Garage_Toyota_GR_Yaris_Brake_Cooling_Ducts.jpg?v=1741271082"},{"product_id":"ast-adjustable-drop-links-toyota-gr-yaris","title":"AST Adjustable Drop Links - Toyota GR Yaris","description":"\u003cp data-start=\"68\" data-end=\"137\"\u003e\u003cstrong data-start=\"68\" data-end=\"137\"\u003eImprove Toyota GR Yaris Handling with Adjustable Front Drop Links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"68\" data-end=\"137\"\u003e\u003cstrong data-start=\"68\" data-end=\"137\"\u003eM10 | 258mm to 276mm adjustment\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-start=\"139\" data-end=\"367\"\u003eLowering your Toyota GR Yaris with coilovers or lowering springs can enhance handling, but it may also cause the anti-roll bar to contact the chassis and suspension components. To avoid this, adjustable drop links are essential.\u003c\/p\u003e\n\u003cp data-start=\"369\" data-end=\"691\"\u003eOur \u003cstrong data-start=\"373\" data-end=\"423\"\u003eAST Adjustable Front Drop Links\u003c\/strong\u003e for the Toyota GR Yaris offer an easy installation and full adjustability, allowing precise anti-roll bar positioning. These drop links are ideal for corner-weighted vehicles, as they eliminate tension caused by slight ride height differences, ensuring even handling.\u003c\/p\u003e\n\u003cp data-start=\"693\" data-end=\"710\"\u003e\u003cstrong data-start=\"693\" data-end=\"710\"\u003eKey Features:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-start=\"711\" data-end=\"904\"\u003e\n\u003cli data-start=\"711\" data-end=\"754\"\u003ePrevent suspension and chassis collisions\u003c\/li\u003e\n\u003cli data-start=\"755\" data-end=\"792\"\u003eFully adjustable for precise tuning 258mm - 276mm\u003c\/li\u003e\n\u003cli data-start=\"793\" data-end=\"821\"\u003eEasy to install and adjust\u003c\/li\u003e\n\u003cli data-start=\"822\" data-end=\"862\"\u003eControl over anti-roll bar positioning\u003c\/li\u003e\n\u003cli data-start=\"863\" data-end=\"904\"\u003eEliminate tension for improved handling\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AST","offers":[{"title":"Default Title","offer_id":55705451397504,"sku":"DLA-10-258-276","price":180.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/image00001_85f06aed-cc05-4212-b0a6-4063e9552798.jpg?v=1739973647"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-911-997-carrera-carrera-s","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 997.1 Carrera | S | 4 | 4S","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 997, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 911 997.1 Carrera 2\u003c\/b\u003e\u003c\/li\u003e\n\u003cli data-path-to-node=\"14,1,0\"\u003e\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003ePorsche 911 997.1 Carrera S\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003ePorsche 911 997.1 Carrera 4\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-path-to-node=\"14,1,0\" data-index-in-node=\"0\"\u003ePorsche 911 997.1 Carrera 4S\u003c\/b\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988413587840,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-911-996-carrera-s-4-4s","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 996 Carrera | S | 4 | 4S","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 996, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-index-in-node=\"4\" data-path-to-node=\"6\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,0,0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,1,0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"8,2,0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-index-in-node=\"51\" data-path-to-node=\"8,2,0\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,0,0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,1,0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"11,2,0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,0,0\"\u003ePorsche 911 996 Carrera 2\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,1,0\"\u003ePorsche 911 996 Carrera 4\u003c\/b\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cb data-index-in-node=\"0\" data-path-to-node=\"14,1,0\"\u003ePorsche 911 996 Carrera 4S\u003c\/b\u003e\u003cb style=\"font-size: 0.875rem;\" data-index-in-node=\"0\" data-path-to-node=\"15\"\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb style=\"font-size: 0.875rem;\" data-index-in-node=\"0\" data-path-to-node=\"15\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb style=\"font-size: 0.875rem;\" data-index-in-node=\"140\" data-path-to-node=\"15\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988551049600,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-911-993-all-models","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 993 All Models","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 993, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 911 993 (All Models)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988575789440,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-911-964-non-turbo","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 964 (Non Turbo)","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 964, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 911 964 (All Non Turbo Models)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988589289856,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-911-1965-1977","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 (1965 - 1977)","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Classic Porsche 911, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 911 (1965 - 1977)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988620484992,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-718-cayman-boxster-spyder","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 718 Cayman Boxster","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a 718 Cayman, Boxster or Spyder, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 718 Cayman (Excluding GT4 \u0026amp; GT4 RS)\u003c\/b\u003e\u003c\/li\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\n\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 718 Boxster\u003c\/b\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003e\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988652663168,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-986-boxster","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 986 Boxster","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a 986 Boxster, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 986 Boxster (All Models)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988691362176,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-987-cayman-boxster","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 987 Cayman | Boxster","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a 987 Cayman or Boxster, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e12x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e12x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e12x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 987 Cayman | Boxster (All Models)\u003c\/b\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\" style=\"font-size: 0.875rem;\"\u003eCustom Applications:\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003c\/span\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"140\" style=\"font-size: 0.875rem;\"\u003econtact us\u003c\/b\u003e\u003cspan style=\"font-size: 0.875rem;\"\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/span\u003e\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988745920896,"sku":"STGTEMSK997","price":120.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/files\/Porsche_911_996_997_993_986_987_718_991_Exhaust_Manifold_Stud_Kit_Titanium_Copper_Brass_Broken_Snapped_Bolt_Replacement.jpg?v=1777390691"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-911-991-1-carrera-4","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 911 (991.1) Carrera2 \u0026 4","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 991, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e18x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e18x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e18x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 991.1 Carrera 2 \u0026amp; Carrera 4\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eCustom Applications:\u003c\/b\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003cb data-path-to-node=\"15\" data-index-in-node=\"140\"\u003econtact us\u003c\/b\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988836589952,"sku":"STGTEMSK991","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_a6278ca1c14f4cb9a4dab34e482f7030_mv2_e9a2c242-a48a-475e-a27e-a33123d05183.jpg?v=1677853654"},{"product_id":"stg-titanium-exhaust-manifold-stud-kit-porsche-981-2-7-3-4s","title":"STG Titanium Exhaust Manifold Stud Kit - Porsche 981 Boxster | Cayman (2.7 \u0026 3.4S)","description":"\u003ch3 data-path-to-node=\"4\"\u003eThe Permanent Solution to Seized \u0026amp; Snapped Manifold Bolts\u003c\/h3\u003e\n\u003cp data-path-to-node=\"5\"\u003eIf you are upgrading your headers or performing maintenance on a Porsche 981, you likely know the reputation of the factory hardware. The original steel bolts are notorious for seizing into the cylinder head, often snapping upon removal and turning a simple job into a costly repair.\u003c\/p\u003e\n\u003cp data-path-to-node=\"6\"\u003eOur \u003cb data-path-to-node=\"6\" data-index-in-node=\"4\"\u003eGrade 5 Titanium Manifold Kit\u003c\/b\u003e completely rectifies this problem. Titanium is naturally resistant to the galvanic corrosion that causes steel bolts to bond to the aluminium head. By replacing your OEM hardware with this kit, you ensure that your manifold remains secure and, crucially, that it can be removed easily in the future without the risk of snapping.\u003c\/p\u003e\n\u003ch3 data-path-to-node=\"7\"\u003eWhy Upgrade to Titanium?\u003c\/h3\u003e\n\u003cul data-path-to-node=\"8\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,0,0\"\u003e\u003cb data-path-to-node=\"8,0,0\" data-index-in-node=\"0\"\u003eZero Corrosion:\u003c\/b\u003e Unlike OEM steel, our Grade 5 Titanium will never rust or seize, preventing the \"snapped stud\" nightmare.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,1,0\"\u003e\u003cb data-path-to-node=\"8,1,0\" data-index-in-node=\"0\"\u003eSuperior Strength-to-Weight:\u003c\/b\u003e Aerospace-grade materials that handle the extreme heat cycles of a high-performance Porsche engine.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"8,2,0\"\u003e\u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"0\"\u003eEase of Maintenance:\u003c\/b\u003e We’ve paired these studs with \u003cb data-path-to-node=\"8,2,0\" data-index-in-node=\"51\"\u003e10mm hex copper K-Nuts\u003c\/b\u003e. The smaller 10mm head provides much-needed clearance when installing bulky aftermarket headers where space is at a premium.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"9\"\u003eKit Contents\u003c\/h3\u003e\n\u003cp data-path-to-node=\"10\"\u003eEach kit is a complete overhaul for your manifold hardware, including:\u003c\/p\u003e\n\u003cul data-path-to-node=\"11\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,0,0\"\u003e\u003cb data-path-to-node=\"11,0,0\" data-index-in-node=\"0\"\u003e18x Grade 5 Titanium Studs\u003c\/b\u003e (M8 x 1.25)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,1,0\"\u003e\u003cb data-path-to-node=\"11,1,0\" data-index-in-node=\"0\"\u003e18x Brass Washers\u003c\/b\u003e (To prevent galling and ensure even clamping)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"11,2,0\"\u003e\u003cb data-path-to-node=\"11,2,0\" data-index-in-node=\"0\"\u003e18x 10mm Hex Copper-Plated K-Nuts\u003c\/b\u003e (Self-locking and heat resistant)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-path-to-node=\"12\"\u003eCompatibility\u003c\/h3\u003e\n\u003cp data-path-to-node=\"13\"\u003eThis kit is a direct replacement for the following models:\u003c\/p\u003e\n\u003cul data-path-to-node=\"14\"\u003e\n\u003cli\u003e\n\u003cp data-path-to-node=\"14,0,0\"\u003e\u003cb data-path-to-node=\"14,0,0\" data-index-in-node=\"0\"\u003ePorsche 981 Boxster | Cayman (2.7 \u0026amp; 3.4S)\u003c\/b\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-path-to-node=\"15\"\u003e\u003cb data-path-to-node=\"15\" data-index-in-node=\"0\"\u003eCustom Applications:\u003c\/b\u003e These studs fit most Porsche engines of this era. If you have a different model or require specific dimensions, please \u003cb data-path-to-node=\"15\" data-index-in-node=\"140\"\u003econtact us\u003c\/b\u003e. We can supply custom titanium studs tailored to your specific requirements.\u003c\/p\u003e","brand":"String Theory Garage","offers":[{"title":"Default Title","offer_id":57988863132032,"sku":"STGTEMSK991","price":139.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0720\/7557\/5573\/products\/16f4f8_a6278ca1c14f4cb9a4dab34e482f7030_mv2_e9a2c242-a48a-475e-a27e-a33123d05183.jpg?v=1677853654"}],"url":"https:\/\/stringtheorygarage.com\/en-im\/collections\/black-friday-2025-10-copy.oembed","provider":"String Theory Garage","version":"1.0","type":"link"}