PWRD Adaptive Air Suspension Lowering Links — Porsche Taycan (2019–Present)
Lower, leaner, and more purposeful — without compromising what makes the Taycan so special.
PWRD Lowering Links are precision-engineered for Taycan models equipped with Adaptive Air Suspension, subtly reducing ride height to your taste from -10mm to -50mm across every factory setting. The result? Sharper handling, improved aero efficiency, and a stance that's exactly how Stuttgart's designers probably intended it to look.
Why Fit PWRD Adaptive Air Suspension Lowering Links?
The Taycan's Adaptive Air Suspension is an impressive piece of engineering — but from the factory, it's tuned to satisfy global ride-height regulations rather than driving enthusiasts. PWRD Lowering Links recalibrate that baseline.
By mechanically adjusting the suspension height sensors, our links lower the vehicle evenly across all drive modes to a drop of your choosing between -10mm and -50mm. You still retain full use of your chassis level control — Low, Lowered, Medium and even Lift settings — each one simply sits lower than stock by the amount you choose. No warning lights, no coding, no compromises.
Lowering the centre of gravity delivers tangible handling benefits, with reduced body movement and a more planted feel through fast corners. At motorway speeds, the reduced ride height can also improve aerodynamic efficiency, helping the Taycan slip more cleanly through the air — which may even have a positive effect on range.
Product Information
PWRD Lowering Links are manufactured to exacting tolerances and designed specifically for Porsche Taycan models fitted with Adaptive Air Suspension. They replace the factory suspension height links and work by subtly altering sensor geometry — a proven, mechanical solution that integrates seamlessly with the OEM system.
Installation is straightforward for a competent workshop and requires no permanent modification to the vehicle. Once fitted, the system remains fully reversible and the factory air-suspension functionality is retained in full. No electronic modules, no software changes, and no interference with normal driving modes. A full wheel alignment check is recommended after fitting.
Lowering Range
The PWRD Lowering Links give you a lowering range from -10mm to -50mm of reduction from each factory ride-height level. You retain full use of all suspension modes — from Lift down to Sport Plus — each simply operating from a lower baseline.
When fitting, there is a magnification factor between the link and the adjustment at the wheelarch:
-
Lengthen the front link to lower the car — 10mm at the link = 25mm at the wheel
-
Shorten the rear link to lower the car — 10mm at the link = 25mm at the wheel
You can adjust link lengths at any time to fine-tune your ride height, or set once and leave.
Key Features
- UK-engineered precision lowering solution for Porsche Taycan
- -10mm to -50mm lowering range across all factory suspension settings
- All OEM drive modes fully retained
- No warning lights, no coding required
- Fully reversible — no permanent modifications
- 24-month warranty
Vehicle Compatibility
Porsche Taycan — 2019 to Present
All derivatives with Adaptive Air Suspension
PCD: 5 × 130 | Centre bore: 71.6mm
